Our RPL Kits are developed to assist in making valid assessment decisions whilst remaining compliant with training standards.
The RPL Kits are written for each qualification and include carefully designed documentation and simple instructions for evidence submission. The kit is designed to cover all units requirements with a range of appropriate assessment methods.
Our RPL Kit includes six steps:
Stage 1: An RPL Application Form and Information booklet for the candidate to complete that meets regulatory compliance, organisational and NCVER requirements.
Stage 2: Includes:
- A self assessment kit for candidates to assess their skills and knowledge
- Competency conversation kit for candidates to demonstrate their skills and explain their level of knowledge.
- Demonstration and observation kit with practical tasks, for candidates to provide additional evidence
This fulfills training package requirements and the collection of supporting documentation and evidence. The kit also includes instructions regarding evidence-gathering tasks (where applicable).
Stage 3: Third Party Kit, to be completed by an independent third party who is familiar with the candidate’s abilities in the workplace and who currently is (or has previously worked) in a supervisory position to the candidate. The third party person is asked to provide feedback on the candidate’s skills and workplace performance.
Stage 4: The RPL Post Assessment Kit. This stage involves all the processes the Assessor and Registered Training Organisation (RTO) undertake to finalise the RPL assessment process for the candidate.
Stage 5: The RPL Trainer and Assessor Kit. This includes benchmarking information for trainers and assessors to enable them to make consistent evaluations of competence. It includes detailed instructions, procedures and recording tools to be used during the process.
Stage 6: Mapping Document. Questions, activities and tasks are mapped to the requirements of each unit of competency.
We provide all documents to you in Microsoft Word format, so you can easily customise them as required. You are free to rebrand and reproduce these within your registered training organisation (RTO). Our RPL Kits can be used for an unlimited number of students within your RTO. Don’t forget about our QUALITY ASSURANCE GUARANTEE!
RTOs purchase a license for their RTO only and are not permitted to share the documents with any other entity. Purchasers are asked to agree to a license agreement to this effect prior to purchase.
Core units | |
---|---|
CPCCCM2012 | Work safely at heights |
CPCPCM2039 | Carry out interactive workplace communication |
CPCPCM2040 | Read plans, calculate quantities and mark out materials |
CPCPCM2041 | Work effectively in the plumbing services sector |
CPCPCM2043 | Carry out WHS requirements |
CPCPCM2045 | Handle and store plumbing materials |
CPCPCM2046 | Use plumbing hand and power tools |
CPCPCM2047 | Carry out levelling |
CPCPCM2048 | Cut and join sheet metal |
CPCPCM2054 | Carry out simple concreting and rendering |
CPCPCM2055 | Work safely on roofs |
CPCPCM3021 | Flash penetrations through roofs and walls |
CPCPCM3022 | Weld polymer pipes using fusion method |
CPCPCM3023 | Fabricate and install non-ferrous pressure piping |
CPCPCM3024 | Prepare simple drawings |
CPCPCM3025 | Install trench support |
CPCPDR2021 | Locate and clear blockages |
CPCPDR2025 | Install stormwater and sub-soil drainage systems and drain work site |
CPCPDR2026 | Install prefabricated inspection openings and inspection chambers |
CPCPDR3021 | Plan layout and install below ground sanitary drainage systems |
CPCPDR3023 | Install on-site domestic wastewater treatment plants and disposal systems |
CPCPFS3031 | Fabricate and install fire hydrant and hose reel systems |
CPCPGS3048 | Install gas pressure control equipment |
CPCPGS3049 | Install gas appliance flues |
CPCPGS3051 | Purge consumer piping |
CPCPGS3053 | Disconnect and reconnect Type A gas appliances |
CPCPGS3054 | Calculate and install natural ventilation for Type A gas appliances |
CPCPGS3056 | Size and install consumer gas piping systems |
CPCPGS3059 | Install LPG storage of aggregate storage capacity up to 500 litres |
CPCPGS3061 | Install and commission Type A gas appliances |
CPCPSN3011 | Plan the layout of a residential sanitary plumbing system and fabricate and install sanitary stacks |
CPCPSN3022 | Install discharge pipes |
CPCPWT3020 | Connect and install storage tanks to a domestic water supply |
CPCPWT3021 | Set out and install water services |
CPCPWT3022 | Install and commission water heating systems and adjust controls and devices |
CPCPWT3025 | Install water pumpsets |
CPCPWT3026 | Install and fit off sanitary fixtures, water services and adjust water service controls |
CPCPWT3027 | Install backflow prevention devices |
CPCPRF2023 | Collect and store roof water |
CPCPRF3022 | Fabricate and install roof drainage systems |
CPCPRF3023 | Fabricate and install external flashings |
CPCPRF3024 | Install roof components |
HLTAID011 | Provide First Aid |
Elective units | |
CPCCCM2008 | Erect and dismantle restricted height scaffolding |
CPCCCM3001 | Operate elevated work platforms up to 11 metres |
CPCPCM2049 | Cut mild steel using oxy-LPG-acetylene equipment |
CPCPCM2052 | Weld mild steel using oxy-acetylene equipment |
CPCPWT3024 | Install and maintain domestic water treatment equipment |
MEM11011 | Undertake manual handling |
MEM13015 | Work safely and effectively in manufacturing and engineering |
MEM16006 | Organise and communicate information |
CPCPCM2053 | Weld using metal arc welding equipment |
CPCPGS3046 | Install LPG systems in caravans, mobile homes and mobile workplaces |
CPCPGS3052 | Maintain Type A gas appliance |
CPCPGS3055 | Install gas sub-meters |
CPCPDR3025 | Plan layout and install vacuum drainage systems |
RIIWHS202E | Enter and work in confined spaces |
RIICTT306E | Install cure in-place linings for existing pipeline systems |
CPCPMS2021 | Assemble mechanical services components |
CPCPMS3031 | Fabricate and install steel pressure piping |
CPCPMS3032 | Select and fit insulation and sheathing |
CPCPMS3035 | Install and test ducting systems |
CPCPMS3036 | Install air handling units |
CPCPMS3038 | Install air conditioning control equipment |
CPCPMS3039 | Maintain mechanical services equipment |
CPCCWC2001 | Complete penetrations and flashings |
CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry |
UEERA0064 | Recover, pressure test, evacuate, charge and leak test refrigerants – split systems |
UEERA0059 | Prepare and connect refrigerant tubing and fittings |
UEERA0049 | Install and start up single head split air conditioning and water heating heat pump systems |
UEECD0007 | Apply work health and safety regulations, codes and practices in the workplace |
CPCPMS3041 | Install domestic solid fuel burning appliances |
CPCPMS3037 | Install and commission a single head split system air conditioning |
If you require RPL Kits with comprehensive benchmarking, please contact us for a quote.